Carving Paisley I by mafi
Carving Paisley I
Oak plank in 3-layer construction, bevelled on the long side and with approx. 4 mm top layer, with approx. 4 mm backing in the same wood and middle layer conifer.
Tongue and groove on all sides for easy installation.
Cracks, branch knots and splay knots are highlighted with black putty. Colour variations and some sapwood are possible.
Small open cracks and unsealed spots in the millimetre range are allowed.
The graphic design is split across 3 floor planks and is repeated several times lengthwise. The planks are numbered on the head end of the groove (1/3, 2/3, 3/3). In order to avoid joins in the same position, there are indicators where to cut and these are marked with CUT along the groove.
Carving is an extraordinary symbiosis between the natural structure of wood and a variety on graphic design.
The innovative Carving technology enables us to engrave classic, retro-modern and contemporary designs into naturally oiled wood surfaces.
At first glance Carving Paisley I offers an oriental charm, however a close look behind the eastern facade will reveal a rocky appearance for the attentive viewer. Nothing is as it seems this fits equally well to the Orient as well as to Carving Paisley I.
Due to its ambivalent design, Carving Paisley I is a striking eye catcher not only on the floor but also on the wall or the ceiling.
mafi | The latest products