Candela by Santa & Cole

Candela

Manufacturer

Designer Gonzalo Milá
Launched in 2009
Architonic id 1102652

Request catalogue
PDF catalogues
Offer
Price request
Contact
Distribution partners
Website
CAD Request
Send page
Print page
Save page
QR-Code
Urban street lamp to light up big roads with basic and tested shapes, designed so that from the road it is seen as a homogeneous element integrated in the urban landscape. Its shape, designed for its function, contains the optical and electric units in an orderly manner, prevents light pollution and its easy handling aids its maintenance. It is manufactured in aluminium injection with a painted finish, recycled and recyclable material. The Candela street lamp coexists on the same column but at different heights with the Rama street light. The CANDELA luminaire consists of three parts: a clamp which adapts to columns with a circular cross section, an arm with a rectangular cross section of different lengths, and the oval luminaire.

Materials and finishes

• Body
The whole unit is manufactured in recycled aluminium with painted finish.
Body, lid and latch in aluminium injection finished with grey powder paint (RAL 9007). Reflector in drawn aluminium and diffuser in toughened glass.

• Arm
The luminaire arm is presented in two sizes (75 and 150 cm) with the aim of adapting the distance between the light source and the column in accordance with the type of road to be lit up and the presence of trees overhead. On being aluminium extrusion, the arm can be adapted to any length between both measurements, or extend to 3 m, the latter incorporating a reinforcing brace. The arm incorporates an aluminium injection clamp at one of its ends

• Columns
Columns with a height of 8.20, 10.20 or 12.20 m, with two sections of circular cross-section tube, the lower part Ø 168 mm and the upper part Ø 127 mm. The columns are manufactured in hot galvanized steel and painted finish for 1 or 2 luminaires at the same or a different height.

The 8.20 and 10.20 m columns are also manufactured in extruded aluminium.

Luminaire
The CANDELA street lamp incorporates an optical body for optimized street lighting for VSAP and HM lamps. It accepts lamps up to 400 W with a luminaire efficiency of over 75%.
• Optical unit
Reflector in high purity drawn anodized aluminium. Diffuser in toughened transparent glass with a thickness of 5 mm which incorporates a mousse sealing in EPDM.
Possibility of horizontal adjustment of the position of the lamp which allows the light distribution to be modified:
• Position -1: Asymmetric type optics
• Position 0: Road optics
• Position +1: Type II optics
• Electric unit
The gear-holding plate is easy to extract.
Units prepared for VSAP and HM lamps.
To improve the energy efficiency of the luminaire,
optionally it can incorporate dual-level adjustable units.
• Fastening to column
System formed by a clamp in two injected aluminium components joined together by stainless steel screws.

Luminaire Candela LED
· Optical unit
Set of street optical lenses
· Electronic equipment
Offers the possibility of powering the lamp from 350 mA to 500 mA.
Adjustable 1-10V or Dali power sources can be supplied as an option.
· Fastening to column. Fastening of the body with aluminium half-clamp using stainless steel screws.
·Luminaire installation. The luminarie is delivered assembled. The rear clamp with the screws is delivered apart with the rest of the element.

Models
· For lighting of big avenues, heights of 8, 10 and 12 m.
· Flexible system, allows 2 luminaires to be placed at the same or a different height.
· The clamp of the unit is adjusted to the diameter of the column of the Rama family of street lamps (127/129 cm), offering a lighting system at several heights which allows all kinds of urban projects to be tackled with an element which combines design and function.

Installation
The element is delivered dismantled in four parts: the column, the luminaire, the arm with the front clamp and, finally, the rear clamp with the screws. The column is fixed by means of a concrete bucket installed in situ and anchor bolts, 20/30 cm below the level of the finished paving. The foundations must foresee the groove for the electric connection. The template and the anchor bolts are delivered with the column.

Maintenance
The change of lamp and the replacement of the units are carried out without the need for tools, in a fast and simple manner. The opening of the body is carried out with a doubleeffect latch placed on the front part of the luminaire, and the cover stays open thanks to a gas piston.

Weights
· 1 luminaire with medium arm and clamp
22,5 Kg.
· Steel columns
140 Kg (8,20 m), 170,5 Kg (10,20 m) y 204 Kg (12,20 m)

Weights Candela LED
· Luminaire
14,5 Kg.
· Stainless steel columns
140 Kg (8,20 m), 170,5 Kg (10,20 m)


Product group: Street lights Street lighting
Designer: Gonzalo Milá

More More
Santa & Cole | The latest products
Where to buy

Architonic partner retailers in your area who distribute this manufacturer

Select a country

and a city/region

or enter a postcode

Search
Representatives
Architonic partner agents and importers for this manufacturer
Show