Airwall by LAB23



Designer Yellow Office
Architonic id 1151278

Send page
Print page
Save page
The bearing structure of AIRWALL is in stainless steel AISI 304 tube bar, 40x40x2 mm, to which steel EN10111DD11 panels are attached, T. 20/10, laser cut shaped with different geometrical figures. On the lower part of AIRWALL there are also some steel EN10111DD11 panels which are not shaped: on the right there is a planter H 500 mm, inside which there is a galvanised steel EN10346DX51D+Z container, T. 15/10. All the panels are fixed to the bearing structure with flared M5 screws.
Inside the tube bar structure on the four corners there are four steel brackets, T. 50/10, each one with a M10 hole for ground fixing with appropriate bolts.
All the steel elements are then cold galvanised and polyester powder coated.

H = 1000/2500 mm
Length = 2100 mm
Width = 500 mm
Hseat/planter = 500 mm

More More
Similar products