13033 Smart Plus by FIGUERAS
13033 Smart Plus
Figueras Design Centre
A modular seat with large dimensions, comprised of fully interchangeable elements. The minimum nominal distance between shafts is 60cm. This distance is not obtained by incorporating wider armrests or accessories between the seats, but by increasing the seat and backrest dimensions. This means that the real minimum space for users is 53cm, thus providing a considerable degree of comfort.
The seat and backrest are formed by two moulded polyurethane foam blocks, with an internal metallic structure and upholstery that are fully integrated into the foam using the INTEGRAL FORM system, with no seams or stitching. If required, the upholstery in leather finishes can be made by hand, with seams. Each armrest is shared by two seats, except in the case of seats at the end of a row or in individual seat layouts. Both the seat and backrest have the TX acoustic system, a series of holes at the rear which give an excellent acoustic response. The seat and backrest may be completely upholstered without diminishing any of the acoustic properties. If required, during conferences with short lengths, a varnished wood lectern rod for writing can be concealed in the side, with an injected aluminium hinge. For long conferences, the seat can be completed with an F-45 table.
• Steel tube and plate, continuous-wire arc welding.
• Seat density: 65kg m3
• Backrest density: 57kg m3
• Electrostatic epoxy powder coating
• Coat thickness: 70-80 microns
• Grid adherence: 100%
• Pilling: Index 5 BS 5811
• Material: IF-727 copolymer
• DIN53455 breaking resistance:
• DIN53453 shock resistance:
REACTION TO FIRE STANDARDS:
BS5852. Section 5. Ignition Sources 0, 1 and 5
DIN54342 Teil 1 und 2
CSE RF/4/83 classe 1. IM
UNE 23727/NF 92-503
Tapicería: M1/Espuma: M4/Plástico: M3
CAL T.B. 133 (with approved fabric)
Designer: Figueras Design Centre
FIGUERAS | The latest products