-
- A vertical rail with right-angle bends at the ends and with shower head holder
- Suitable for various manufacturers' shower heads
- Tilt of shower head holder can be continuously adjusted and its height adjusted by pulling or pushing a large lever
- Conical locator on the shower head holder makes it easy to hang up the hand-held shower head
- With continuous, corrosion-proof steel core
- Centre-to-centre 600, 900, 1100 mm and 90 mm deep, rail diameter 33 mm, rose diameter 70 mm
- Special lengths are possible
- Made of high-quality polyamide in the HEWI colours
801.33.100
Centre-to-centre: 600 mm
D: 90 mm
Rail diameter 33 mm
Rose diameter 70 mm
801.33.110 (Centre-to-centre: 900 mm)
801.33.120 (Centre-to-centre: 1100 mm)
801.33.1S (Special length)
Più
Rail with shower head holder
ID
801.33.100
Architonic ID 1098016
-
- Rectangular plate glass mirror with polished edges, integrated shatter protection film and cylindrical lamps attached to the side
- The mirror can be tilted by max. 28° using the winding handle and cable pull and can therefore be used in both a standing and sitting position
- With two integrated, energy-saving compact fluorescent lamps FSD 9W, socket G 23, splashproof, protection class II, degree of protection IP 44
- 700 mm wide (mirror 600 mm), 540 mm high and 6 mm thick, lamps 195 mm high
- Mirror made of polished plate glass
- Lamp cover made of UV-resistant acrylic glass
- Holding elements, winding handle and lamp holder made of high-quality polyamide in the HEWI colours
- CE mark according to MPG
W: 700 mm (mirror 600 mm)
H: 540 mm
6 mm thick
Lamps 195 mm high
Più
Adjustable tilting mirror with lighting
ID
801.01.200
Architonic ID 1097988
-
- Rectangular mirror with polished edges
- Is fixed to the wall by four flat mirror holders
- Rear coated with copper and protected by two-coat varnish
- Incl. mirror holders 1260 mm high
- Mirror holder 30 mm wide, 60 mm high and 18 mm deep
- Mirror made of crystal glass, mirror holders made of high-quality polyamide in the HEWI colours
W: 600 mm
H: 1200 mm
6 mm thick
Più
Plate glass mirror (wall mirror with holders)
ID
801.01.300
Architonic ID 1097989
-
- Shelf with all-round edge and clamped in plate made of transparent plastic
- 600 mm wide, 28 mm high and 140 mm deep, plate glass 572 mm wide
- Frame made of high-quality polyamide in the HEWI colours
- Shelf area made of transparent, matt-white plastic
W: 600 mm
H: 28 mm
D: 140 mm
Plate glass 572 mm wide
Più
Shelf
ID
801.03.100
Architonic ID 1097991
-
- Round tumbler with flat bottom and holder
- Tumbler: 80 mm high and 74 mm diameter
- Holder: 97 mm wide, 25 mm high and 100 mm deep
- Made of high-quality polyamide in the HEWI colours
Tumbler 801.04.020:
H: 80 mm
D: 74 mm
Holder 801.00.100:
W: 97 mm
H: 25 mm
D: 100 mm
Insert opening 74 mm in diameter
Più
Tumbler and holder
ID
801.04.020
Architonic ID 1097997
-
- Toilet brush unit consisting of toilet brush and container
- Long brush handle with ergonomic gripping handle and black polyamide brush head
- Tapered container with large opening at the top
- When placed in the container, the brush is guided, automatically centred and independently stands upright.
- With internal reservoir in the container for holding disinfectant
- 575 mm high, 130 mm wide and 140 mm deep
- Made of high-quality polyamide in the HEWI colours
H: 575 mm
W: 130 mm
T: 140 mm
Più
Toilet brush unit
ID
801.20.100
Architonic ID 1098001
-
- Rail bent upwards at right angles with fixing rose
- Used as a holder for one toilet roll
- Also available as version for two or three rolls of toilet paper
- Anti-theft protection due to concealed screw connection
- 158 mm high, and 92 mm deep, rose diameter 70 mm
- Made of high-quality polyamide in the HEWI colours
H: 158 mm
D: 92 mm
Rose diameter 70 mm
Più
Spare roll holder
ID
801.21.201
Architonic ID 1098004
-
- Used to hold onto and for support on standing up and sitting down in the WC area
- With continuous, corrosion-proof steel core
- Horizontal length 300 mm, vertical length 600 mm, 90 mm deep, rail diameter 33 mm, rose diameter 70 mm
- Other lengths and versions available
- Made of high-quality polyamide in the HEWI colours
- Toilet roll holder can be retrofitted
- CE mark according to MPG
Horizontal length 300 mm
Vertical length 600 mm
90 mm deep
Rail diameter 33 mm, rose diameter 70 mm
Più
L-shaped support rail
ID
801.22.100
Architonic ID 1098010
-
- Used to hold onto and for support on standing up and sitting down in the WC area
- With continuous, corrosion-proof steel core
- Centre to centre spacings: - 834 mm wide, 850 mm high and 135 mm deep, rail diameter 33 mm, rose diameter 70 mm
- Made of high-quality polyamide in the HEWI colours
- Toilet roll holder 801.50.010 can be retrofitted
- Other lengths available
Centre-to-centre: 834 mm
H: 850 mm
D: 135 mm
Rail diameter 33 mm
Rose diameter 70 mm
Più
Floor to wall stationary support
ID
801.22.400
Architonic ID 1098011
-
- Used to hold onto and for support
- With continuous, corrosion-proof steel core
- Horizontal lengths 762 mm and 474 mm, 90 mm deep, rail diameter 33 mm, rose diameter 70 mm
- Numerous lengths and versions available
- Suitable for removable hanging seat
- Made of high-quality polyamide in the HEWI colours
Horizontal lengths 762 mm and 474 mm
90 mm deep
Più
Shower, bath grab rail
ID
801.35.100
Architonic ID 1098023
-
- Used to hold onto and for support
- With continuous, corrosion-proof steel core
- Centre-to-centre 300 mm, rail diameter 33 mm, rose diameter 70 mm
- Different lengths and versions available
- Made of high-quality polyamide in the HEWI colours
Centre-to-centre: 300 mm
Più
Grab bar Range
ID
801.36.100
Architonic ID 1098025
-
- Made of rails, seat and back elements
- Used as a removable seat in the shower area
- For hanging onto shower rails with vertical support bar and grab rails with a rail diameter of 33 mm
- Maximum load 150 kg
- 345 mm wide, 400 mm high and 480 mm deep, seat 345 mm wide and 336 mm deep, 400 mm centre of tube to top of seating area, seating elements 55 mm wide
- Made of high-quality polyamide in the HEWI colours
- Different versions available
W: 345 mm
H: 400 mm
D: 480 mm
Più
Removable hanging seat
ID
801.51.100
Architonic ID 1098029
-
- Can be folded up
- The seat tilt is adjustable
- With continuous, corrosion-protected steel core and integrated wall plate made of steel with cover made of high-quality polyamide
- Maximum load 150 kg
- Seat 345 mm wide and 408 mm deep, height 259 mm, seating elements 55 mm deep
- Made of high-quality polyamide in the HEWI colours
- Different versions available
Seat
W: 345 mm
D: 408 mm
H: 259 mm
Più
Hinged seat
ID
801.51.200
Architonic ID 1098031
-
- Used as a seat in the bathroom
- With continuous, corrosion-proof steel core
- Maximum load 150 kg
- 345 mm wide, 500 mm high and 336 mm deep, seating elements 55 mm wide
- Made of high-quality polyamide in the HEWI colours
W: 345 mm
H: 500 mm
D: 336 mm
Più
Stool
ID
801.51.300
Architonic ID 1098034
-
- The hooks are for hanging up pieces of clothing, laundry and other utensils
- Anti-theft protection due to concealed screw connection
- 30 mm deep, rose diameter 40 mm high
- Made of high-quality polyamide in the HEWI colours
- Several lengths and versions available
D: 30 mm
Rose diameter 40 mm
Più
Single hook
ID
801.90.010
Architonic ID 1098036
Share
Tweet
Stumble
