Crossed de LAB23

CROSSED BIN consists of an external envelope, characterised by a “texture” called CROSSED and made of cold galvanised and polyester powder coated steel (or Corten treated with an oxidation cycle), thickness 20/10, whilst the inner container is in hot galvanised and polyester powder coated steel EN10346DX51+Z (or Corten treated with an oxidation cycle).
On the upper part of the internal container there are two oval holes, 120x60 mm, which act as handles.
The container is reinforced by a border, H 10 mm and Width 5 mm, helpful to adjust an elastic cord, D. 10 mm, used to fix the waste sack and it is placed on a steel EN10111DD1 ring, T. 30/10, welded on the internal circumference of the bin.
The cover of CROSSED is made of cold galvanised and polyester powder coated steel (or Corten treated with an oxidation cycle), thickness 40/10.
The latter is fixed to the body of the bin through a strong hinge with three wings, T. 30/10. The bin itself is ensured by a spring lock with a triangular key.
At the centre of the cover there is a hole, D. 260 mm, while on the bottom of the bin there are 3 holes, D. 10 mm, for the ground fixing with appropriate bolts.

Dimensions
240 mm
Superior diameter = 420 mm
H = 600 mm
Capacity 30 Lt
All fixings in stainless steel AISI 304

The CROSSED PLANTER is made of galvanised and polyester powder coated steel EN10111DD1, T. 20/10 (or Corten treated with a particular oxidation cycle).
On the upper part, along the entire circumference, there is a fascia 20x2, while the upper surface of the planter is characterised by a “texture” called CROSSED and obtained through laser cutting
There are two overflows welded to the base of the planter made out of steel tubes 16x2mm, h 50mm.
There are 4 M10 holes for the ground fixing with appropriate bolts.

Dimensions
D base = 440 mm
D superior = 1200 mm
H = 600 mm

The CROSSED bench is made of steel EN10111DD1, T. 40/10, (or Corten treated with an oxidation cycle). The seat is made from a unique steel sheet plate, characterised by a particular laser shaped “texture” called CROSSED. Under the seat in the L 1900 version there are two reinforcing steel EN10111DD1 plates, while there is only one plate in the L 550 version, T. 40/10 H 30 mm. These sheet plates serve to create the seat shape.
At the base of the seat there are two folds of 80 mm on which there are 4 holes, D. 10 mm, for the ground fixing with appropriate bolts.

Maximum dimensions
H seat = 430 mm
H backrest = 720 mm
Length = 1900/550 mm
Width = 660 mm

All fixings in stainless steel AISI 304

The CROSSED bollard is made of galvanised and polyester powder coated steel EN10111DD1, T. 60/10 (or Corten, treated with an oxydation cycle).
The bollard consists of three elements welded through a continuous wire welding. The vertical ones are characterised by a particular laser shaped "texture" called CROSSED, and a base with specific M10 holes for the ground fixing with appropriate bolts. Whereas the in-ground version is supplied with a steel base and a galvanised steel tube bar, D. 30 mm, T. 2 mm and H. 250 mm.

Dimensions
H = 1000 mm
Width = 100 mm
Depth = 50 mm