Hangar Design Group
The TOWER bin is composed of a strong structure made of galvanised and polyester powder coated steel, thickness 30/10. The door of the litter bin is in steel EN10111DD11 15/10 and coated with an exotic multilayer-wood panel, T. 10 mm, shaped by controlled three-dimensional pantograph and joined almost invisibly giving the visual effect of a series of ribs. The latter is fixed to the door with M4 screws. The door is fixed to the body of the bin through a strong hinge with two wings, T. 20/10, furthermore it has a universal triangular key lock. The door is equipped with an air piston which acts as a closure, fitted between the door and the body .
Inside the bin there is a container for the waste in galvanised steel EN10346DX51+Z, T. 15/10 and dimensions 230 x 230 x h 500 mm, which lays on a plate, T. 30/10, welded to the body of the bin. The base of the bin has 4 M10 holes for the ground fixing with appropriate bolts.
Length = 250 mm
H= 1200 mm
Width = 250 mm
All fixings are in stainless steel AISI304