Single von LAB23

The SINGLE seat is totally made of galvanised and polyester powder coated steel, Thickness 60/10. It consists of two bent sheet plates and linked together through a continuous wire welding and the upper part of the backrest shows some rectangular figures.
The base of the seat is fixed to the ground through four M10 holes and the respective bolts.

Maximum dimensions:
H backrest = 860
H seat = 450 mm
Length = 590 mm
Width of the seat = 625 mm

All fixings are in stainless steel AISI304

The main structure of the SINGLE WOOD seat is in galvanised and polyester powder coated steel, thickness 60/10. The upper part of the seat and the backrest are made of solid exotic wood, 30 mm thick , treated with natural waterproof oils.

The backrest is shaped by controlled three-dimensional pantograph, thus obtaining several geometrical figures. The seat is fixed to the bearing structure through hexagonal M8 screws fixed to the wood. Two robust end supports made of steel EN10111DD11, 60/10 thick, are fixed on the seat and on the backrest with hexagonal M10 screws screwed on appropriate bearings anchored to the wood.

Maximum dimensions:
H backrest = 860
H seat = 150 mm
Length = 590 mm
Width = 625 mm

All fixings are in stainless steel AISI304