Eco von LAB23

ECO, (two models available: bench or seat), consists of two solid end supports in cast iron sandblasted and finally polyester and powder coated. The ribs of the seat and the backrest are in solid exotic wood, specially treated with natural waterproof oils and they are fixed to the end supports with hexagonal screws on special bearings anchored to the wood. The key feature of the bench is that all the fixings are hidden. On the bottom of the end supports there are M10 holes for ground fixing through appropriate bolts.
All fixings are in stainless steel AISI 304

Maximum dimensions
H backrest = 800mm
Hseat = 430 mm
Length = 1565 mm
Wseat = 450 mm

ECO, consists of two solid end supports in cast iron sandblasted and finally polyester and powder coated. The ribs of the seat and the backrest are in solid exotic wood, specially treated with natural waterproof oils and they are fixed to the end supports with hexagonal screws on special bearings anchored to the wood. The key feature of the bench is that all the fixings are hidden. On the bottom of the end supports there are M10 holes for ground fixing through appropriate bolts.
All fixings are in stainless steel AISI 304

Maximum dimensions
H backrest = 800mm
Hseat = 430 mm
Length = 1565 mm
Wseat = 450 mm

ECO, consists of two solid end supports in cast iron sandblasted and finally polyester and powder coated. The ribs of the seat are in solid exotic wood, specially treated with natural waterproof oils and they are fixed to the end supports with hexagonal screws on special bearings anchored to the wood. The key feature of the bench is that all the fixings are hidden. On the bottom of the end supports there are M10 holes for ground fixing through appropriate bolts.
All fixings are in stainless steel AISI 304

Maximum dimensions
Hseat = 430 mm
Length = 1565 mm
Wseat = 450 mm

ECO, (two models available: bench or seat), consists of two solid end supports in cast iron sandblasted and finally polyester and powder coated. The seat and the backrest are made of steel EN10111DD11 or stainless steel AISI 304 sections of pipe, Ø 16×2 mm, and they are fixed on appropriate supports assembled with the end supports with M8 screws. The elements with sections of pipe are 7, three of which have 5 sections of pipe, the others have four of them. In the central part of the seat there is a “C” profile, T. 30/10, made of steel EN10111DD11 or stainless steel AISI 304, which reinforces the central part of the pipe sections and on which it is added a shaped end support made of steel EN10111DD11 or stainless steel AISI 304 sheet plate, T. 6 mm. On the bottom of the end supports there are M10 holes for ground fixing through appropriate bolts.
All fixings are in stainless steel AISI 304

Maximum dimensions:
H seat=430 mm
Length=1565 mm
W seat=450 mm

ECO, (two models available: bench or seat), consists of two solid end supports in cast iron sandblasted and finally polyester and powder coated. The seat and the backrest are made of steel EN10111DD11 or stainless steel AISI 304 sections of pipe, Ø 16×2 mm, and they are fixed on appropriate supports assembled with the end supports with M8 screws. The elements with sections of pipe are 7, three of which have 5 sections of pipe, the others have four of them. In the central part of the seat there is a “C” profile, T. 30/10, made of steel EN10111DD11 or stainless steel AISI 304, which reinforces the central part of the pipe sections and on which it is added a shaped end support made of steel EN10111DD11 or stainless steel AISI 304 sheet plate, T. 6 mm. On the bottom of the end supports there are M10 holes for ground fixing through appropriate bolts.
All fixings are in stainless steel AISI 304

Maximum dimensions:
H backrest=800mm
H seat=430 mm
Length=1565 mm
W seat=450 mm