Datasheet TECU® Classic
TECU® Classic is the product name for traditional bright rolled TECU® sheets and TECU® strips. Initially, the material has the aesthetic qualities of the bright copper surface which, on exposure to the atmosphere, slowly changes to dark brown as the oxide layer forms and later develops copper's typical green patina layer on pitched surfaces.
The design and planning possibilities of TECU® Classic allow a continuous stream of new developments and innovative ideas in the world of today’s and tomorrow’s modern architecture.
TECU® sheets and strips are available in a bright rolled copper colour as TECU® Classic. TECU® sheets are also produced with a green patina on one side and marketed as TECU® Patina , TECU® strips are available with a layer of brown oxide as TECU® Oxid and in the tinned surface of TECU® Zinn.
TECU® sheets are now also available in the new copper alloys TECU® Brass and TECU® Bronze for façade cladding solutions.
TECU® sheets and strips are produced in two qualities, both of which exceed the requirements of EN 1172:
Roofing quality
The material data for TECU® sheets and strips meet substantially stricter tolerance limits in regard to straightness (longitudinal curvature), surface flatness (evenness) and the main technological values than are required by EN 1172.
Façade quality
Tolerances of façade quality TECU® sheets and strips in regard to straightness (longitudinal curvature) and surface flatness (evenness) are even narrower than for TECU® roofing quality. These are especially suitable for façade cladding using seaming techniques.
The design and planning possibilities of TECU® Classic allow a continuous stream of new developments and innovative ideas in the world of today’s and tomorrow’s modern architecture.
TECU® sheets and strips are available in a bright rolled copper colour as TECU® Classic. TECU® sheets are also produced with a green patina on one side and marketed as TECU® Patina , TECU® strips are available with a layer of brown oxide as TECU® Oxid and in the tinned surface of TECU® Zinn.
TECU® sheets are now also available in the new copper alloys TECU® Brass and TECU® Bronze for façade cladding solutions.
TECU® sheets and strips are produced in two qualities, both of which exceed the requirements of EN 1172:
Roofing quality
The material data for TECU® sheets and strips meet substantially stricter tolerance limits in regard to straightness (longitudinal curvature), surface flatness (evenness) and the main technological values than are required by EN 1172.
Façade quality
Tolerances of façade quality TECU® sheets and strips in regard to straightness (longitudinal curvature) and surface flatness (evenness) are even narrower than for TECU® roofing quality. These are especially suitable for façade cladding using seaming techniques.
Company:
Address:
Klosterstrasse 29
49074 Osnabrück
Germany
Phone +49-(0)541-321-0
KM Europa Metal AG
Klosterstrasse 29
49074 Osnabrück
Germany
Phone +49-(0)541-321-0
Advertisement
Advertisement