Datasheet Form plates made from stainless steel / aluminium
stainless steel:
Qualität
X 5 CrNi 1810 (DIN 17441) 1.4301 (Material No.)
Formats
The maximum standard width B is 1490 mm in its grinding direction. Since these structural plates are freely programmable it is not possible to state the maximum length L without any knowledge of your structural requirements.
Tolerances
Width (B) : ± 0,5 mm
Length (L) : ± 1,5 mm
Height (h) : ± 0,2 mm
Valid for Form Plates not machined.
Form Plate squareness:
Deviation in length to the vertical up to max. 0,3%.
Material thickness
t = 0,8 mm
Surface
K - 240
ground on one side grinding direction vertical to width, with protective foil.
Other materials, thickness structural hights and surface finishes on demand.
aluminium:
Quality
Al Mg3 (DIN 1725) 5754 (Intern. reference) 3.3535 (Material No.)
Formats
The maximum standard width B is 1490 mm. Since these structural plates are freely programmable it is not possible to state the maximum length L without any knowledge of
your structural requirements.
Tolerances
Width (B) : ± 0,5 mm
Length (L) : ± 1,5 mm
Height (h) : ± 0,15 mm
Valid for Form Plates not machined.
Form Plate squareness:
Deviation in length to the vertical up to max. 0,3%.
Material thickness
t = 0,8 mm
Surface
mill finish anodised E6/EV1
Other materials, thickness and
surface finishes including perforation on demand.
Qualität
X 5 CrNi 1810 (DIN 17441) 1.4301 (Material No.)
Formats
The maximum standard width B is 1490 mm in its grinding direction. Since these structural plates are freely programmable it is not possible to state the maximum length L without any knowledge of your structural requirements.
Tolerances
Width (B) : ± 0,5 mm
Length (L) : ± 1,5 mm
Height (h) : ± 0,2 mm
Valid for Form Plates not machined.
Form Plate squareness:
Deviation in length to the vertical up to max. 0,3%.
Material thickness
t = 0,8 mm
Surface
K - 240
ground on one side grinding direction vertical to width, with protective foil.
Other materials, thickness structural hights and surface finishes on demand.
aluminium:
Quality
Al Mg3 (DIN 1725) 5754 (Intern. reference) 3.3535 (Material No.)
Formats
The maximum standard width B is 1490 mm. Since these structural plates are freely programmable it is not possible to state the maximum length L without any knowledge of
your structural requirements.
Tolerances
Width (B) : ± 0,5 mm
Length (L) : ± 1,5 mm
Height (h) : ± 0,15 mm
Valid for Form Plates not machined.
Form Plate squareness:
Deviation in length to the vertical up to max. 0,3%.
Material thickness
t = 0,8 mm
Surface
mill finish anodised E6/EV1
Other materials, thickness and
surface finishes including perforation on demand.
hole pattern cut by laser
F 2208 K-240
partly structurated with different grinding directions
F 2205 K-240
milled and slew bended
F 1305
ps gf partly structurated and milled at the back
F 1316
Company:
Address:
Leichtbauelemente / Light weight constructions
Brunnhausgasse 3
85049 Ingolstadt
Germany
Overview Materials
All Materials
Fielitz GmbH
Leichtbauelemente / Light weight constructions
Brunnhausgasse 3
85049 Ingolstadt
Germany
Overview Materials
All Materials
Advertisement
