Product sheet Up

Architonic-ID: 1044161

Designer:
Kreon

Light becomes theatrical

Up will add dynamism to your architecture, walls become sculptures and works of art show their mysticism. As the name implies, the Up directs it’s light mainly vertically upwards. Depending on the lightsource or the use of interchangeable reflectors, the Up is available with different light distributions from narrow-beam to a wide-angle uplight. The Up is designed with a deep-set lamp source to reduce glare problems and supplementary louvers can be placed in the reflector’s aperture as an extra protection against glare. The Up is a recessed fixture made of high-pressure die-cast aluminium with a silver wetpaint finish and can be used in wall, ceiling or floor applications where an IP54 rating is required. The double glazing creates an in-depth effect, in which the outer press fit glass covers the lower glass. Up creates a simple but powerful image that is effective through the light it emits.

Up can be recessed in floors, walls or ceilings and is suitable for interior and exterior use. Due to the limited IP-rating, special precautions have to be taken when the fitting is installed in outdoor floor applications. Two versions are available: clear or frosted glass. The lightsources of Up have been upgraded with CDM-Tm to increase the light output and allows you to use this fitting in energy efficient applications or public spaces. The light distribution of the CDM-tm and QT12-ax versions depends on the reflector chosen: spot, medium, flood or wallwasher. The Up is available with or without internal transformer.

up; up ceiling/wall

lamptype: QT12-ax; T2 MLF; CDM-Tm

visible LxW: 145x137

cut out LxW: 136x128

fitting: GY6.35; GX53; PGJ5

max. watt: 50W; 35W; 7W; 20W

voltage: 12V; 230V/12V; 230V; 230V/1,5kV

IP/class: 54/3/10; 54/1/10

Double Up can be recessed in floors, walls or ceilings and is suitable for interior and exterior use. Due to the limited IP-rating, special precautions have to be taken when the fitting is installed in outdoor floor applications. Depending on the lightsources, two versions are available with clear or frosted glass. The light distribution of the QT12-ax versions depends on the reflector chosen: spot, medium, flood or wallwasher. The Double Up is available with or without internal transformer.

double up; double up ceiling/wall

lamptype: TC-L; TC-DEL

visible LxW: 352x145

cut out LxW: 343x136

fitting: 2G11; G24q-1; GY6.35; RX7s-24

max. watt: 18W; 2x13W; 2x35W; 150W

voltage: 230V; 230V/12V; 230V/5kV

IP/class: 54/1/10

Double Up TC-L/DEL

When the recessing depth in floors, ceilings or walls is restricted, the Flat Up can be used. This fitting is suitable for interior and exterior use but due to the limited IP-rating, special precautions have to be taken when the fitting is installed in outdoor floor applications. The Flat Up is ideal when the recessing depth is restricted. Only a frosted glass version is available.

flat up; flat up ceiling/wall; flat round up; flat round up ceiling/wall

lamptype: QT9-ax

visible LxW/Ø: 145x137; Ø 62 x Ø 157

cut out LxW/Ø: 136x128; Ø 148

fitting: G4

max. watt: 20W

voltage: 12V

IP/class: 54/3/10

Flat Up

Up LED gives the Up range a characteristic, uniform soft light. Standard available in cold white. The use of additional filters can create a warm white illumination or 6 unique colours.

flat up; flat up ceiling/wall; flat round up; flat round up ceiling/wall; mini up; mini up ceiling/wall; mini round up ceiling/wall

lamptype: LED

visible LxW/Ø: 145x137; Ø 157; 98x92; Ø 97

cut out LxW/Ø: 136x128; Ø 148; 89x83; Ø 88

max. watt: 2W; 1,2W

voltage: 24V; 230V/24V

IP/class: 54/2/10

Mini Up LED

Mini Up can be recessed in floors, walls or ceilings and is suitable for interior and exterior use. Due to the limited IP-rating, special precautions have to be taken when the fitting is installed in outdoor floor applications. Two versions are available: clear or frosted glass.

mini up; mini up ceiling/wall

lamptype: QR-CBC35

visible LxW/Ø: 98x92

cut out LxW/Ø: 89x83

fitting: GU4

max. watt: 20W

voltage: 12V

IP/class: 54/3/10

Mini Up

Double Up can be recessed in floors, walls or ceilings and is suitable for interior and exterior use. Due to the limited IP-rating, special precautions have to be taken when the fitting is installed in outdoor floor applications. Depending on the lightsources, two versions are available with clear or frosted glass. The light distribution of the QT12-ax versions depends on the reflector chosen: spot, medium, flood or wallwasher. The Double Up is available with or without internal transformer.

double up; double up ceiling/wall

lamptype: QT12-ax

visible LxW: 352x145

cut out LxW: 343x136

fitting: GY6.35

max. watt: 2x35W

voltage: 230V/12V

IP/class: 54/1/10

Double Up QT12-ax

Mini Round Up can be recessed in floors, walls or ceilings and is suitable for interior and exterior use. Due to the limited IP-rating, special precautions have to be taken when the fitting is installed in outdoor floor applications. Two versions are available: clear or frosted glass.

mini round up ceiling/wall

lamptype: QR-CBC35

visible LxW/Ø: Ø 97

cut out LxW/Ø:Ø 88

fitting: GU4

max. watt: 20W

voltage: 12V

IP/class: 54/3/10

Mini Round Up