Product sheet Nimbus

Finish: Stainless steel.
Material: Sleeve: Marine grade 316 stainless steel. Glass: Toughened clear glass. Front plate: Marine grade 316 stainless steel. Housing: Teflon coated, aluminium coloured, die cast aluminium.
Mounting: Sleeve: Recommended mounting in optional installation sleeve. Installation sleeve (Ø 129x137mm) to be ordered separately. Ø 125mm is mounted in level/flush with the wall. Front plate Ø 150mm mounted at the wall. Terminal block: 2x3x2.5mm². Cable entries: Standard: 1x M20 IP68 gland for Ø 6-12mm cable. DMX: 3x M20 IP68 glands for Ø 6-12mm cable. Wall: Suitable for mounting in brick, wood or concrete walls.
Weight: Max. 2kg.
Class: Ingress protection IP67. Electric shock protection I w. ground.
Info notes: For specifications on LED types please consult your local Louis Poulsen lighting supplier. DMX: Delivered as DMX controlable. Special DMX cables are available from Louis Poulsen Lighting. Emergency versions available on request. Please use Ø 150mm sleeve for both Ø 150mm and 130x130mm fittings.

Finish: Stainless steel.
Material: Sleeve: Marine grade 316 stainless steel. Glass: Toughened clear glass or toughened frosted glass. Top plate: Marine grade 316 stainless steel. Housing: Teflon coated, aluminium coloured, die cast aluminium. Transformer housing: Grey, injection moulded polyetherinide.
Mounting: Sleeve: Recommended mounting in optional installation sleeve. Installation sleeve (Ø 129x137/225/300/350mm) to be ordered separately. Ø 125mm is mounted in level with the ground. Ø 150mm is mounted on the ground. Terminal block: Electric shock Protection I: 1x3x2,5mm², Electric shock Protection III: 1x2x2,5mm². Cable entries: One-part body: 1x M20 IP68 gland for Ø 6-12mm cable. Two-part body: 2x M20 IP68 gland for Ø 6-12mm cable. Inground: Suitable for burial in earth/pea-shingle or cast into concrete.
Weight: Max. 3.5kg.
Class: Ingress protection IP67. Electric shock protection I w. ground, III low voltage.
Info notes: Short body class III are for remote control gear, control gear not supplied as standard. Long body, class III versions are "low heat versions" with light source lowered in the buried housing to reduce top plate temperatures; for remote control gear, control gear not supplied. Long body class I versions with integral control gear. Two part body with integral control gear. Frosting and partly frosting is a process done to the standard clear glass, contact Louis Poulsen. In the QPAR 20 version the light source can be tilted to approx 10°. Non-standard top plates are available on request. Square bevelled top plates are avaiable on request. HIT-CRI versions are available with remote gear on request. Please use Ø 150mm sleeve for both Ø 150mm and 130x130mm fittings.

Finish: Stainless steel.
Material: Sleeve: Marine grade 316 stainless steel. Glass: Toughened white opal glass. Top plate: Marine grade 316 stainless steel. Housing: Teflon coated, aluminium coloured, die cast aluminium.
Mounting: Sleeve: Recommended mounting in optional installation sleeve. Installation sleeve (Ø 129x137mm) to be ordered separately. Ø 125mm is mounted in level with the ground. Ø 150mm is mounted on the ground. Terminal block: 2x3x2.5mm². Cable entries: Standard: 1x M20 IP68 gland for Ø 6-12mm cable. DMX: 3x M20 IP68 glands for Ø 6-12mm cable. Inground: Suitable for mounting in wood, burial in earth/pea shingle, or cast into concrete.
Weight: Max. 2kg.
Class: Ingress protection IP67. Electric shock protection I w. ground.
Info notes: For specification on LED types please consult your local Louis Poulsen Lighting supplier. DMX: Delivered as DMX controlable. Special DMX cables available from Louis Poulsen Lighting. Square bevelled top plates available on request. Emergency versions available on request. Please use Ø 150mm sleeve for both Ø 150mm and 130x130mm fittings.

Finish: Stainless steel.
Material: Sleeve: Marine grade 316 stainless steel. Glass: Toughened clear glass. Top plate: Marine grade 316 stainless steel. Housing: Teflon coated, aluminium coloured, die cast aluminium.
Mounting: Sleeve: Recommended mounting in optional installation sleeve. Installation sleeve (Ø 129x137mm) to be ordered separately. Ø 125mm is mounted in level with the ground. Ø 150mm is mounted on the ground. Terminal block: 2x3x2.5mm². Cable entries: Standard: 1x M20 IP68 gland for Ø 6-12mm cable. DMX: 3x M20 IP68 glands for Ø 6-12mm cable. Inground: Suitable for mounting in wood, burial in earth/pea shingle, or cast into concrete.
Weight: Max. 2kg.
Class: Ingress protection IP67. Electric shock protection I w. ground.
Info notes: For specifications on LED types please consult your local Louis Poulsen Lighting supplier. The Ø 125mm top plate is with straight edge, whereas the Ø 150mm top plate has got a bevelled edge. The 130mm square plate has a straight edge. Polycarbonate top plate available on request. DMX: Delivered as DMX Controlable. Special DMX cables available from Louis Poulsen Lighting. Square bevelled top plates available on request. Emergency versions available on request. Please use Ø 150mm sleeve for both Ø 150mm and 130x130mm fittings.

Finish: Stainless steel.
Material: Sleeve: Marine grade 316 stainless steel. Glass: Toughened clear glass. Top plate: Marine grade 316 stainless steel. Housing: Teflon coated, aluminium coloured, die cast aluminium.
Mounting: Sleeve: Recommended mounting in optional installation sleeve. Installation sleeve (Ø 129x137mm) to be ordered separately. Ø 125mm is mounted in level with the ground. Ø 150mm is mounted on the ground. Terminal block: 2x3x2.5mm². Cable entries: Standard: 1x M20 IP68 gland for Ø 6-12mm cable. DMX: 3x M20 IP68 glands for Ø 6-12mm cable. Inground: Suitable for mounting in wood, burial in earth/pea shingle, or cast into concrete.
Weight: Max. 2kg.
Class: Ingress protection IP67. Electric shock protection I w. ground.
Info notes: For specification on LED types please consult your local Louis Poulsen Lighting supplier. DMX: Delivered as DMX controlable. Special DMX cables available from Louis Poulsen Lighting. Square bevelled top plates available on request. Emergency versions available on request. Please use Ø 150mm sleeve for both Ø 150mm and 130x130mm fittings.

Finish: Stainless steel.
Material: Sleeve: Marine grade 316 stainless steel. Glass: Toughened white opal glass. Front plate: Marine grade 316 stainless steel. Housing: Teflon coated, aluminium coloured, die cast aluminium.
Mounting: Sleeve: Recommended mounting in optional installation sleeve. Installation sleeve (Ø 129x137/225mm) to be ordered separately. Ø 125mm is mounted in level with the wall. Front plate Ø 150mm mounted at the wall. Terminal block: Electric shock Protection I: 1x3x2,5mm², Electric shock Protection III: 1x2x2,5mm². Cable entries: 1x M20 IP68 gland for Ø 6-12mm cable. Wall: Suitable for mounting in brick and concrete walls.
Weight: Max. 2kg.
Class: Ingress protection IP67. Electric shock protection I w. ground, III low voltage.
Info notes: The TC-D version is not phase-compensated. Low voltage halogen (QT) versions are for remote transformer, transformer not supplied as standard. Please use Ø 150mm sleeve for both Ø 150mm and 130x130mm fittings.