Product sheet Desk
Designer:
Bruno Fattorini
Francesco Bettoni
Bruno Fattorini
Francesco Bettoni
A family of equipped tables and console tables to be used both at work or at home, made by combining the natural anodized or polished aluminium of the frame with the various finishes of the top.
They come with a bar to support the equiment, the drawer cabinets and/or the CPU cases (one for single tables, two for faceto-face tables).
Four different configurations available:
DESK WITH TABLETOPS AND TWO LEGS FOR CABLE ACCESS
Tables in width 90 cm and lengths 160, 180, 200 and 220 cm, equipped with two legs (1 right and 1 left) which allow access to the cables in the inside, with sliding trays under the tabletops for cables and outlets and with two closing tabletops for cable management. The trays (420x170 mm) of natural anodized aluminium, slide freely onto two supporting bars with gasket. The closing tabletops for cable management, in the same finish of the tops, can be repositioned so as to give access to the connections. The tops allow the cables to exit freely.
FACE-TO-FACE DESK WITH TABLETOPS AND TWO LEGS FOR CABLE ACCESS
Tables in width 160 cm and lengths 160, 180, 200 and 220 cm, or 180x240 cm in size. Tables in lengths 200, 220, 240 cm always come with a central leg (5th leg) so as to assure tabletops to be perfectly flat.
Provided with:
• two legs (1 right and 1 left), allowing access to the cables in the inside,
• sliding trays (one for hiding cables and one for housing outlets accessible from both sides)
• two closing tabletops for cable management
• two U-shaped raceways for cable management (20x20mm)
The trays (420x236 mm) of natural anodized aluminium, slide freely onto two supporting bars with gasket. The closing tabletops for cable management, in the same finish of the tops, can be repositioned so as to give access to the connections. The tops allow the cables to exit freely.
DESK WITH A SHELF AND A SMALL OPENING FOR CABLE ACCESS
A table 80x160 cm in size, with one leg (right or left) which gives access to the cables in the inside and a small opening on the tabletop 9 cm off the edge to provide access to the cables complete with outlets tray. This small opening (dims 350x100 mm) comes in anodized aluminium with a removable door and gasket. It is always positioned at the same side of the cable leg. The table comes with a shelf (250 mm deep and at a height of 105 mm from the tabletop) made from a bent and shaped anodized aluminium
sheet.
Upon request, the version with two cable legs is available.
STRUCTURE
Frame and legs in natural anodized or polished aluminium. Concealed joint, a patent from MDF Italia. An equipment supporting bar made of aluminium-lacquered steel.
Height 75 cm.
TOPS
All tops are built-in and need no fittings. They are approx. 9 mm thick and come in:
• Matt Keramik made of a glass panel and a satin-finished 3 mm thick ceramic plate in white, anthracite grey, light grey or medium grey, patent from MDF Italia (Patent pending). The tabletops with the small opening consist of a panel made up of two coupled plates of ceramic, thickness approx. 7mm
• Lacquered tempered glass in orange, black, light grey, red, yellow, green, white. The small opening for cable access is flush with the tabletop.
ACCESSORIES
• DRAWER CABINETS
• DESK CPU CASE (vertical only) 51 cm deep, 52 cm high, 21 cm long.
• HOME DESK CPU CASE (vertical only), 53 cm deep, 52 cm high, 24 cm long.
• MODESTY PANELS, anodized aluminium and simply screwed to the legs of the table (predrilled).
• RACEWAY FOR CABLE MANAGEMENT, anodized aluminium, 20x20mm
• CABLE TRAY (additional)
• OUTLETS TRAY (additional)
They come with a bar to support the equiment, the drawer cabinets and/or the CPU cases (one for single tables, two for faceto-face tables).
Four different configurations available:
DESK WITH TABLETOPS AND TWO LEGS FOR CABLE ACCESS
Tables in width 90 cm and lengths 160, 180, 200 and 220 cm, equipped with two legs (1 right and 1 left) which allow access to the cables in the inside, with sliding trays under the tabletops for cables and outlets and with two closing tabletops for cable management. The trays (420x170 mm) of natural anodized aluminium, slide freely onto two supporting bars with gasket. The closing tabletops for cable management, in the same finish of the tops, can be repositioned so as to give access to the connections. The tops allow the cables to exit freely.
FACE-TO-FACE DESK WITH TABLETOPS AND TWO LEGS FOR CABLE ACCESS
Tables in width 160 cm and lengths 160, 180, 200 and 220 cm, or 180x240 cm in size. Tables in lengths 200, 220, 240 cm always come with a central leg (5th leg) so as to assure tabletops to be perfectly flat.
Provided with:
• two legs (1 right and 1 left), allowing access to the cables in the inside,
• sliding trays (one for hiding cables and one for housing outlets accessible from both sides)
• two closing tabletops for cable management
• two U-shaped raceways for cable management (20x20mm)
The trays (420x236 mm) of natural anodized aluminium, slide freely onto two supporting bars with gasket. The closing tabletops for cable management, in the same finish of the tops, can be repositioned so as to give access to the connections. The tops allow the cables to exit freely.
DESK WITH A SHELF AND A SMALL OPENING FOR CABLE ACCESS
A table 80x160 cm in size, with one leg (right or left) which gives access to the cables in the inside and a small opening on the tabletop 9 cm off the edge to provide access to the cables complete with outlets tray. This small opening (dims 350x100 mm) comes in anodized aluminium with a removable door and gasket. It is always positioned at the same side of the cable leg. The table comes with a shelf (250 mm deep and at a height of 105 mm from the tabletop) made from a bent and shaped anodized aluminium
sheet.
Upon request, the version with two cable legs is available.
STRUCTURE
Frame and legs in natural anodized or polished aluminium. Concealed joint, a patent from MDF Italia. An equipment supporting bar made of aluminium-lacquered steel.
Height 75 cm.
TOPS
All tops are built-in and need no fittings. They are approx. 9 mm thick and come in:
• Matt Keramik made of a glass panel and a satin-finished 3 mm thick ceramic plate in white, anthracite grey, light grey or medium grey, patent from MDF Italia (Patent pending). The tabletops with the small opening consist of a panel made up of two coupled plates of ceramic, thickness approx. 7mm
• Lacquered tempered glass in orange, black, light grey, red, yellow, green, white. The small opening for cable access is flush with the tabletop.
ACCESSORIES
• DRAWER CABINETS
• DESK CPU CASE (vertical only) 51 cm deep, 52 cm high, 21 cm long.
• HOME DESK CPU CASE (vertical only), 53 cm deep, 52 cm high, 24 cm long.
• MODESTY PANELS, anodized aluminium and simply screwed to the legs of the table (predrilled).
• RACEWAY FOR CABLE MANAGEMENT, anodized aluminium, 20x20mm
• CABLE TRAY (additional)
• OUTLETS TRAY (additional)
Manufacturer:
Address:
Via Morimondo, 5/7
20143 Milano
Italy
Phone +39-02-81804100
Fax +39-02-81804108/09
www.mdfitalia.it
E-mail contact
Collection overview
Family overview
Product overview
MDF Italia
Via Morimondo, 5/7
20143 Milano
Italy
Phone +39-02-81804100
Fax +39-02-81804108/09
E-mail contact
Collection overview
Family overview
Product overview
