Product sheet Plaza
Designer:
José A. Martínez Lapeña
Elías Torres
Year:
1990
José A. Martínez Lapeña
Elías Torres
Year:
1990
This is a giant flowerpot for trees and shrubs made using a strong standard structure, divisible into panels of different materials and finishes. It is suitable for areas where conventional planting is not possible.
It has a square base and is made in different sizes from materials conventionally and frequently-used in the world of the construction such as steel and plywood or dunnaged wood. Two types of front material are available so that it adapts to the aesthetic needs of the surroundings. This may be plywood or resin with different finishes, materials which withstand wet conditions and impact or any other material as required.
Because of its shape and conception, it is easily-transported and put into position. It has a large capacity, suitable for any situation.
The smaller planter is especially suitable for creating small gardens in patios and on domestic roofs. It should be remembered that the area which houses it should be able to withstand the heavy weight of the large volume of earth it contains.
The planter comprises a steel-section structure with cataphoresis protection, is finished with a coat of black forged Oxiron paint, and is in a T and an L shape, welded to each other. This structure supports the front ends, made in materials resistant to the wet and to impact. They are normally in 22 mm plywood or prefabricated resin boards with different finishes. It may be optionally made with other front-ends. The bottom of the planter is made in heat-galvanised metal mesh able to withstand weights of up to 1000 kg. The inner trough is in glass fibre. The unit is delivered assembled and is simply positioned on four adjustable stainless steel legs for proper levelling. Assembly instructions are included with the unit. It does not require maintenance.
It has a square base and is made in different sizes from materials conventionally and frequently-used in the world of the construction such as steel and plywood or dunnaged wood. Two types of front material are available so that it adapts to the aesthetic needs of the surroundings. This may be plywood or resin with different finishes, materials which withstand wet conditions and impact or any other material as required.
Because of its shape and conception, it is easily-transported and put into position. It has a large capacity, suitable for any situation.
The smaller planter is especially suitable for creating small gardens in patios and on domestic roofs. It should be remembered that the area which houses it should be able to withstand the heavy weight of the large volume of earth it contains.
The planter comprises a steel-section structure with cataphoresis protection, is finished with a coat of black forged Oxiron paint, and is in a T and an L shape, welded to each other. This structure supports the front ends, made in materials resistant to the wet and to impact. They are normally in 22 mm plywood or prefabricated resin boards with different finishes. It may be optionally made with other front-ends. The bottom of the planter is made in heat-galvanised metal mesh able to withstand weights of up to 1000 kg. The inner trough is in glass fibre. The unit is delivered assembled and is simply positioned on four adjustable stainless steel legs for proper levelling. Assembly instructions are included with the unit. It does not require maintenance.
Manufacturer:
Address:
Parc de Belloch
Ctra C-251 km 5,6
08430 La Roca. Barcelona
Spain
Phone +34-(0)938-462 437
Fax +34-(0)938-711 767
www.santacole.com
E-mail contact
Collection overview
Product overview
Santa & Cole
Parc de Belloch
Ctra C-251 km 5,6
08430 La Roca. Barcelona
Spain
Phone +34-(0)938-462 437
Fax +34-(0)938-711 767
E-mail contact
Collection overview
Product overview
