Product sheet Orbiter
Designer:
Jens Møller-Jensen
Year:
1963
Jens Møller-Jensen
Year:
1963
The design of the reflector ring directs the major part of the light downwards. The anti-glare ring shields the light source from direct view.
Info notes: The control gear for class I versions is placed in the fixture head. Control gear for the HI-C version is placed in the fixture head. For class II incandescent and vapour lamp versions, note that control gear for these versions is not supplied as standard and must be ordered separately (semi-parallel ballast/ignitor and capacitor) and placed in the pole. The class I vapour lamp versions with control gear in the fixture head are phase-compensated except from the HSE-E version which is not phase-compensated. Transition pieces for Ø 60mm and Ø 70mm pole can be bought as accessory parts.
Info notes: The control gear for class I versions is placed in the fixture head. Control gear for the HI-C version is placed in the fixture head. For class II incandescent and vapour lamp versions, note that control gear for these versions is not supplied as standard and must be ordered separately (semi-parallel ballast/ignitor and capacitor) and placed in the pole. The class I vapour lamp versions with control gear in the fixture head are phase-compensated except from the HSE-E version which is not phase-compensated. Transition pieces for Ø 60mm and Ø 70mm pole can be bought as accessory parts.
Orbiter Micro Ceiling creates distinct and sparkling lighting.
Finish: White, powder coated.
Material: Saturn ring: Punched steel. Anti glare ring: Spun steel.
Mounting: Ceiling thickness: 5-32mm. Ceiling Cut-Out: Ø 70mm. Terminal block: 1x2x4mm². Looping: Not approved. Ballast: Supplied without transformer.
Weight: Max. 0.5kg.
Class: Ingress protection IP20. Electric shock protection III low voltage.
Finish: White, powder coated.
Material: Saturn ring: Punched steel. Anti glare ring: Spun steel.
Mounting: Ceiling thickness: 5-32mm. Ceiling Cut-Out: Ø 70mm. Terminal block: 1x2x4mm². Looping: Not approved. Ballast: Supplied without transformer.
Weight: Max. 0.5kg.
Class: Ingress protection IP20. Electric shock protection III low voltage.
Orbiter Micro Ceiling
Orbiter Ceiling provides general lighting.
Finish: Galvanized, hot dipped. White or grey, powder coated.
Material: Enclosure: Clear glass or partly frosted glass. Saturn ring: Punched aluminium or galvanized, punched steel. Anti glare ring: Spun aluminium or galvanized, extruded steel. Housing: Die cast aluminium.
Mounting: Terminal block: 1x3x2.5mm2. Cable entries: 2x top entry for Ø 20.3mm and 2x side entry. Looping: Approved.
Weight: Max. 3.5 kg.
Class: Ingress protection IP44. Electric shock protection I w. ground. F-mark: Yes.
Info notes: Clear polycarbonate (PC) accessory enclosure instead of glass enclosure only to be used with TC-TEL version. Please note that the housing appears in natural aluminium surface for the versions with galvanized shades. Both natural aluminium and galvanized surfaces will oxidate during time. This can result in an inconsistent surface finish during oxidation. This process might have begun already during stocking/transportation.
Dimension: Dia 275 x H 240 mm
Finish: Galvanized, hot dipped. White or grey, powder coated.
Material: Enclosure: Clear glass or partly frosted glass. Saturn ring: Punched aluminium or galvanized, punched steel. Anti glare ring: Spun aluminium or galvanized, extruded steel. Housing: Die cast aluminium.
Mounting: Terminal block: 1x3x2.5mm2. Cable entries: 2x top entry for Ø 20.3mm and 2x side entry. Looping: Approved.
Weight: Max. 3.5 kg.
Class: Ingress protection IP44. Electric shock protection I w. ground. F-mark: Yes.
Info notes: Clear polycarbonate (PC) accessory enclosure instead of glass enclosure only to be used with TC-TEL version. Please note that the housing appears in natural aluminium surface for the versions with galvanized shades. Both natural aluminium and galvanized surfaces will oxidate during time. This can result in an inconsistent surface finish during oxidation. This process might have begun already during stocking/transportation.
Dimension: Dia 275 x H 240 mm
Orbiter Ceiling
Orbiter Wall provides general lighting.
Finish: Galvanized. White or grey, powder coated.
Material: Enclosure: Clear glass or partly frosted glass. Saturn ring: Punched aluminium or galvanized, punched steel. Anti glare ring: Spun aluminium or galvanized, extruded steel. Housing: Die cast aluminium. Wall box: Die cast aluminium. Arm: Extruded aluminium.
Mounting: Terminal block: 1x3x2.5mm². Cable entries: 2x rear entries for cable Ø 10-14.5mm and 2x bottom knockouts Ø 15mm. Looping: Approved, max. 3x1,5mm².
Weight: Max. 3.5kg.
Class: Ingress protection IP44. Electric shock protection I w. ground. F-mark: Yes.
Finish: Galvanized. White or grey, powder coated.
Material: Enclosure: Clear glass or partly frosted glass. Saturn ring: Punched aluminium or galvanized, punched steel. Anti glare ring: Spun aluminium or galvanized, extruded steel. Housing: Die cast aluminium. Wall box: Die cast aluminium. Arm: Extruded aluminium.
Mounting: Terminal block: 1x3x2.5mm². Cable entries: 2x rear entries for cable Ø 10-14.5mm and 2x bottom knockouts Ø 15mm. Looping: Approved, max. 3x1,5mm².
Weight: Max. 3.5kg.
Class: Ingress protection IP44. Electric shock protection I w. ground. F-mark: Yes.
Orbiter Wall
Orbiter Bollard provides wide symmetrical lighting.
Finish: Grey, aluminium coloured with textured surface or graphite with textured surface, powder coated.
Material: Reflector: White, spun aluminium. Enclosure: Injection moulded clear polycarbonate. Ring: Spun aluminium. Anti glare ring: Spun aluminium. Base: Die cast aluminium. Top: Die cast aluminium. Post: Extruded aluminium.
Mounting: Max. installation cable: 1 or 2x5x2,5mm2 or depending on installation box. In-ground struts: Yes. Flange measurements: Ø 230x15mm. Flange mounting holes: 3x Ø 16mm holes in an equilateral triangular pattern on a pitch diameter of Ø 190.5mm. Terminal block positioning: In post. Ballast: Yes. Ballast positioning: In post.
Weight: Max. 13 kg.
Class: Ingress protection IP44. Electric shock protection I w. ground, II w/o ground. F-mark: Yes.
Finish: Grey, aluminium coloured with textured surface or graphite with textured surface, powder coated.
Material: Reflector: White, spun aluminium. Enclosure: Injection moulded clear polycarbonate. Ring: Spun aluminium. Anti glare ring: Spun aluminium. Base: Die cast aluminium. Top: Die cast aluminium. Post: Extruded aluminium.
Mounting: Max. installation cable: 1 or 2x5x2,5mm2 or depending on installation box. In-ground struts: Yes. Flange measurements: Ø 230x15mm. Flange mounting holes: 3x Ø 16mm holes in an equilateral triangular pattern on a pitch diameter of Ø 190.5mm. Terminal block positioning: In post. Ballast: Yes. Ballast positioning: In post.
Weight: Max. 13 kg.
Class: Ingress protection IP44. Electric shock protection I w. ground, II w/o ground. F-mark: Yes.
Orbiter Bollard
Orbiter Mini provides glare-free and symmetrical lighting.
Finish: Grey, aluminium coloured with textured surface or graphite with textured surface, powder coated.
Material: Top shade: Form pressed glass fibre. Enclosure: Injection moulded clear polycarbonate or injection moulded white opal polycarbonate. Anti glare ring: Injection moulded polycarbonate. Base: Die cast aluminium.
Mounting: Pole dimension: Ø 60mm. Installation cable: 4m, 2x1,5mm² or 4m, 3x1.5mm². Terminal block: 1x3x2.5mm². Terminal block positioning: In fixture head. Ballast: Yes. Ballast positioning: In fixture head.
Weight: Max. 7.5kg.
Class: Ingress protection IP66. Electric shock protection I w. ground, II w/o ground.
Finish: Grey, aluminium coloured with textured surface or graphite with textured surface, powder coated.
Material: Top shade: Form pressed glass fibre. Enclosure: Injection moulded clear polycarbonate or injection moulded white opal polycarbonate. Anti glare ring: Injection moulded polycarbonate. Base: Die cast aluminium.
Mounting: Pole dimension: Ø 60mm. Installation cable: 4m, 2x1,5mm² or 4m, 3x1.5mm². Terminal block: 1x3x2.5mm². Terminal block positioning: In fixture head. Ballast: Yes. Ballast positioning: In fixture head.
Weight: Max. 7.5kg.
Class: Ingress protection IP66. Electric shock protection I w. ground, II w/o ground.
Orbiter Mini Post
Orbiter Maxi provides glare-free and symmetrical lighting.
Finish: Grey, aluminium coloured with textured surface or graphite with textured surface, powder coated.
Material: Top shade: Form pressed glass fibre. Enclosure: Injection moulded clear polycarbonate or injection moulded white opal polycarbonate. Anti glare ring: Injection moulded polycarbonate. Base: Die cast aluminium.
Mounting: Pole dimension: Ø 76mm. Installation cable: 5m, 2x1,5mm² or 5m, 3x1,5mm². Terminal block: 1x3x2.5mm². Terminal block positioning: In fixture head. Ballast: Yes. Ballast positioning: In fixture head.
Weight: Max. 14.5kg.
Class: Ingress protection IP66. Electric shock protection I w. ground, II w/o ground.
Finish: Grey, aluminium coloured with textured surface or graphite with textured surface, powder coated.
Material: Top shade: Form pressed glass fibre. Enclosure: Injection moulded clear polycarbonate or injection moulded white opal polycarbonate. Anti glare ring: Injection moulded polycarbonate. Base: Die cast aluminium.
Mounting: Pole dimension: Ø 76mm. Installation cable: 5m, 2x1,5mm² or 5m, 3x1,5mm². Terminal block: 1x3x2.5mm². Terminal block positioning: In fixture head. Ballast: Yes. Ballast positioning: In fixture head.
Weight: Max. 14.5kg.
Class: Ingress protection IP66. Electric shock protection I w. ground, II w/o ground.
Orbiter Maxi Post
Orbiter Pendant provides general lighting.
Finish: Galvanized, hot dipped. White or grey, powder coated.
Material: Enclosure: Clear glass or partly frosted glass. Saturn ring: Punched aluminium or galvanized, punched steel. Anti glare ring: Spun aluminium or galvanized, extruded steel. Top: Die cast aluminium. Cover plate: Die cast aluminium.
Mounting: Suspension type: Cable. Canopy: Yes. Cable length: 3m.
Weight: Max. 3kg.
Class: Ingress protection IP20. Electric shock protection I w. ground. F-mark: Yes.
Finish: Galvanized, hot dipped. White or grey, powder coated.
Material: Enclosure: Clear glass or partly frosted glass. Saturn ring: Punched aluminium or galvanized, punched steel. Anti glare ring: Spun aluminium or galvanized, extruded steel. Top: Die cast aluminium. Cover plate: Die cast aluminium.
Mounting: Suspension type: Cable. Canopy: Yes. Cable length: 3m.
Weight: Max. 3kg.
Class: Ingress protection IP20. Electric shock protection I w. ground. F-mark: Yes.
Orbiter Pendant
Orbiter Micro Pendant creates distinct and sparkling lighting.
Finish: White, powder coated.
Material: Enclosure: Clear glass. Saturn ring: Punched steel. Anti glare ring: Spun steel. Top: Die cast aluminium.
Mounting: Suspension type: Cable 2x0,75mm². Canopy: Yes. Cable length: 2.5m.
Weight: Max. 1kg.
Class: Ingress protection IP20. Electric shock protection III low voltage. F-mark: Yes.
Finish: White, powder coated.
Material: Enclosure: Clear glass. Saturn ring: Punched steel. Anti glare ring: Spun steel. Top: Die cast aluminium.
Mounting: Suspension type: Cable 2x0,75mm². Canopy: Yes. Cable length: 2.5m.
Weight: Max. 1kg.
Class: Ingress protection IP20. Electric shock protection III low voltage. F-mark: Yes.
Orbiter Pendant
Year: 1963
Year: 1963
Manufacturer:
Address:
Industrivej Vest 41
6600 Vejen
Denmark
Phone +45-(0)33-31 11 66
Fax +45-(0)33-29 86 19
www.louis-poulsen.com
Collection overview
Family overview
Product overview
Louis Poulsen Lighting A/S
Industrivej Vest 41
6600 Vejen
Denmark
Phone +45-(0)33-31 11 66
Fax +45-(0)33-29 86 19
Collection overview
Family overview
Product overview
More Product Groups
bollard lights
ceiling lights
mast lights
outdoor ceiling lights
outdoor wall lights
pendant lights
recessed ceiling lights
walkway lights
wall lights
bollard lights
ceiling lights
mast lights
outdoor ceiling lights
outdoor wall lights
pendant lights
recessed ceiling lights
walkway lights
wall lights
